Note: You will need X11

Third Place: The Unarchiver is an excellent unarchiving application, with support for many formats

Second Place: p7zip is a ported version of the popular 7zip, the code is command line only. However, it is effectively used in EZ7Z. However, this app costs $4.99 to unlock the full features. This app can also make archives.

First Place: Zipeg is a useful archive manager that allows you to open and view archives. It also allows you to add files to archives. Everyone must have this app!

Third Place: The best mac video converter WAS VisualHub. However, the project is dead. An open source project can be found here

Seccond Place: Perian is a free, open source app that will allow QuickTime to open almost any file format, including AVI and FLV files. The only common format that I have noticed that it doesn’t have are WMV files.

First Place: VLC is the SUPREME media player. With an incredible list of file formats, VLC can’t be beat. VLC can open a file even if it has no extension. VLC has saved my life sometimes with its ability to read damaged video files VLC is by far the greatest media player in existence.

First, you need an external HD, obviously the HD must be larger than your restore partition.

In Windows you must go to “Control Panel” in the Start Menu. From there you need to press “Switch to Classic View” on the upper left side of the screen. (If it says “Switch to Category View, then you are already in classic view) Double click on “Folder Options” Then go to the “View” tab.

From here you should see a switch that says “Do Not Show Hidden Files” and “Show Hidden Files”, click “Show Hidden Files”

If you cannot access your recovery partition, then download and install the Ext2ifs Then go to Control Panel, and in Classic View, find “IFS Drives” In the window assign a letter to the recovery partition.

Ok, now this part should be pretty easy. In my computer, simply drag and drop all of the files in your recovery partition over to an external HD. And YES ALL OF THEM!

Now this is the confusing part, you need to install grub, if you have linux, then this should be easy, otherwise it could be a bit challenging. To install grub refer to my previous post right here The menu.lst file is already edited to fit this need.

Then you will need the grub files, If you are using my “How to Backup Your Recovery Partition” guide, then the menu.lst should be tailored to your needs, you can download the files from me here unzip these into the root directory of your hardrive. If you are using my “How to Backup Your Recovery Partition” guide, unzip the file into the root of your external hd. If you want to edit your boot commands, you can edit the /boot/grub/menu.lst files.

Now boot your super grub disk (in linux, you can just type “sudo grub” instead”) and press c to enter the command line.

now type the following:
find /boot/grub/stage1
You should get something like:
(hd1,0)
(hd2,0)

If you only got one, you can skip this step, otherwise you have to type:
geometry (hd1) (or whatever number you got earlier)
and you’ll get something like:
drive 0x81: C/H/S = 0/255/63, The number of sectors = 3915775, /dev/sdb
Partition num: 0, Filesystem type is fat, partition type 0xc

If it looks like the right drive (mabie only one partition, with the right partitioning scheme and file system) then type:
root (hd1,0) (or whatever the numbers are)

then type:
setup (hd1) (you get it right, it could be (hd2) or (hd0) or even (hd999))

Then you should have a perfectly working version of grub!

METHOD 1: To install ubuntu or debian, and many other operating systems on a netbook, you can use my earlier post but with the ubuntu iso which can be found here or the Debian Iso

METHOD 2: However, there is an even easier way that doesn’t involve the use of a U3 smart drive. It is called UNetbootin!
Simply install Unetbootin from their homepage Run the downloaded file, select ubuntu, debian, fedora, etc. from the first dropdown menu.
Then just select the letter of your flash drive at the bottom. Hit enter, when it finishes downloading and setting up you have a bootable usb stick. Hit the restart button and hit F12 to enter the boot menu (if you don’t have a boot menu, then you probably have to hit F2 to enter BIOS, then set your USB as the primary boot device). Then you should proceed with the install following the onscreen prompts!

METHOD 3: The last method is to simply run the ubuntu wubi.exe in windows, this file can be found here Just run the application and reboot when you’re told.

Often people will say that their install “didn’t work” but with three methods…. well one of them has to, right?

However, sometimes the recovery partition is gone, broken, or simply never existed. There are some methods out there to fix this, however, they often don’t work. This method is clean, simple, smart, and leaves you with a still-usefull usb drive in the end!

First, you need to obtain a U3 smart drive, they can be found here or even at staples.

If you have a U3 smart drive, then a cd drive will be visible in My Computer, don’t worry if you uninstalled U3 from your drive, it will still work.

This CD is like 6MB and is stupid and irritating (starting to wonder why I said you needed it?) However useless this CD is, we can make this CD into the Windows install disk. Pretty clever, right?

You will need the Universal Customizer. Which you can download from me here. Unzip the file, and open up the resulting folder, in here you will find a folder called “BIN”, open this folder and replace the blank “U3CUSTOM.ISO” with a windows xp install disk iso (can be made from a win xp home disk or can be downloaded off of the internet)

If you need an xp iso, you can download it off TPB, email me if you have any questions/concerns.

Once you have replaced the file, simply plug in your U3 USB device, and run “Universal_Customizer.exe” follow the onscreen steps, set a password, and wait until the progress bar comes up, it will instantly get to 50%, and then take hours to complete, this will take some time.

When it is done, reboot your computer (hold F12 if using an Acer Aspire 1, or hold any other key in order to access your boot menu in order to boot off the virtual CD drive. Once you successfully boot, go through the standard install steps, your serial number in probably on the bottom of your netbook.

email:Admin@techline4teens.com

Hope to hear from you!

THE PROBLEM: Most hardrives are formated fat32 or fat16, both of these formats have a limitation. The issue is that each of these formats cannot hold files over 2gb. If the file that you NEED to copy over is greater than 2gb, then it WILL NOT COPY OVER.

WARNING: Backup the contents of the drive, because both methods will ERASE EVERYTHING ON THE DRIVE.

SOLUTION 1 (the mac way): You can use this meathod if and only if you ONLY WISH TO USE THE HARDRIVE ON APPLE COMPUTERS (not PCs)

Step 1) Unplug all other drives from computer, leave only THE drive that you are trying to fix.

Step 2) Open Finder, and go to /Applications/Utillities/

Step 3) Open the application DiskUtillity.app

Step 4) Find your hardrive in the list at the left of the window.

Step 5) Click on the hardrive, not the name of the HD but the thing above it, it brobably says something stupid like “500 GB WD MyBook”. But it could be anything.

Step 6) Check the bottom to make sure it is the wright size, don’t want to partition the wrong drive. (even thoug you unplugged them all.)

Step 7) Look at the tabs near the top of the window, one should say either “Partitions” or “Partition Editor” or “Partition” (depending on your version of MAC OSX)

Step Where it says current, click and change to “1 Partition”.

Step 9) Hit options, and change the drive from “Master Boot Reccord” to “Apple Partition Map”

Step 10) Make sure that the drive’s partition type is “Mac OSX Extended Journaled”

Step 11) Click the “apply” button and wait.

SOLUTION 2: The PC Method, requires access to a pc.

Step 1) Plug drive into a PC

Step 2) Click on “My Computer” from the start menu.

Step 3) Find the drive, right click on it and click on “Format…”

Step 4) Change Fat32 or Fat16 to NTFS.

Step 5) Hit ENTER and wait.

Step 6) To write to this drive on a Mac, you will need NTFS-3G If this driver becomes unavailable, I will build it myself.

That’s it, now you can copy large files to your drive!